The standard
Every corner of the typical boltless shelving unit features vertical angle posts with 1.5-inch keyhole openings. To support the decking material, which is often made of wire, steel, or particle board, all of the horizontal beams on the unit run from left to right and from front to rear, forming a shelf. While the intermediate shelves employ L-shaped single rivet angle beams that join to the posts at one point on each side, the horizontal beams at the top and bottom of the unit are double rivet angle beams that attach at two points of each post. A maximum amount of space may be left free between shelves thanks to the low profile of single-rivet beams. However, because of their narrower width, these beams can support less weight—typically between 250 and 350 pounds per shelf. There are no side crossbars, like with all boltless shelving kinds, allowing you to reach your contents from any angle.
Read More: metal storage racks
Bulk and Heavy-Duty Shelving
Consider a heavy duty boltless shelving unit, also known as bulk shelving, if you need to store a larger load. They are made out of horizontal beams and vertical angle posts, much like a typical unit. A heavy duty unit, on the other hand, has double-rivet ends on all of its horizontal beams, which are broader and provide an additional point of contact with the vertical posts for increased sturdiness. There are two types of double rivet beams: C-shaped channel beams and L-shaped angle beams. The design of double rivet channel beams, which may be utilized left to right on all levels with the exception of the bottom, maximizes shelf capacity and stability. Heavy strength boltless shelving units contain center supports that run front to back along the middle of the shelf in addition to stronger beams. Center supports are an excellent reinforcement for any type of decking material, enabling your shelves withstand heavy loads, even if they do require bolting into place. Bulk boltless shelving units are capable of supporting hundreds of pounds more weight than their normal counterparts thanks to the center supports and double rivet beams.
The Specialty Shelving
Numerous robust boltless shelf solutions are created to meet certain requirements. To store all of your old papers and documents in one location, for instance, document storage shelving is designed to accommodate record boxes that are 12 inches in width, 15 inches in depth, and 10 inches in height.
Automotive heavy-duty garage shelving is another popular specialist design. While boltless tailpipe racks are particularly constructed with beams along the top from which to hang car and light truck tailpipes—no decking required—muffler storage units provide for consistent storage for various sizes and shapes of mufflers and may handle substantial amounts of weight. Additionally, boltless tire storage racks have horizontal beams that are specifically engineered with flanges at a 30-degree angle to cradle regular car and light truck tires and prevent them from rolling away. In this manner, you may stack tires without sacrificing their accessibility or organization!
CONSTRUCTING THE IDEAL Metal Storage Racks Set
To complete your ideal shelving system, you must purchase the appropriate pieces after determining which kind of rivet shelving is best for your requirements. Metal storage shelf comes in separate components for maximum customization because every piece fits together and interlocks.
STARTERS
The starter, or your standard shelf unit, is the first item you’ll need. Each of the four corners has a single vertical angle post, and each shelf contains two front-to-back length angle beams and two left-to-right length angle or channel beams (angle beams are always present on the lowest level). You will also receive a center support that is the full length of each shelf level if you are utilizing bulk shelving units. You will require one starting unit at the beginning for each row of shelves that you construct.
Adders
Adders, as their name implies, lengthen the row by joining starts. Each adder unit includes two vertical tee posts to link the units together. Move the current vertical angle posts to the new end of your row and use a tee post to attach the adder to the end. Two front-to-back length angle beams, two left-to-right angle or channel beams, and one center support (for heavy duty systems) per shelf level are the same as a starting for all horizontal beams. To get the specified row length, you can join as many adders as necessary.
Decking
After acquiring the necessary starters and adders, you’ll need to arrange your decking. This material, which often consists of wire, steel, and particle board, is what slides into place to create the shelf’s real platform. The most common choice for any kind of boltless shelving is 5/8-inch industrial grade particle board decking due to its smooth surface and affordability. You could also want to think about steel decking, which is made of galvanized steel fashioned into 6-inch-deep C-shaped channel boards. It’s a fashionable and fire-resistant alternative. Heavy strength double rivet shelving is the optimum usage for steel decking that is 48 inches or wider since it needs center supports to avoid bending and breaking. In contrast, wire decking is an excellent option for adding more ventilation to your boltless shelf. Its thick gauge welded wire grid design permits airflow through your shelves without sacrificing structural integrity. Make sure you get a single piece of decking for every shelf, regardless of the type you choose. This may usually be purchased with the rest of your shelf units, or by purchasing decking locally, you may be able to save paying as much for shipping. Specifically, particle board is not particularly hard to source.